Name: GB50386-2016轧机机械设备工程安装验收规范（英文版）
Author: 中华人民共和国住房和城乡建设部
ISBN: 9787518208616

微信读书书城GB50386-2016轧机机械设备工程安装验收规范（英文版）

首页我的书架登录

GB50386-2016轧机机械设备工程安装验收规范（英文版）中华人民共和国住房和城乡建设部

微信读书推荐值

待评分

推荐(0)

一般(0)

不行(0)

阅读

1人

电子书

会员卡可读

字数

12.8万字

简介

本规范适用于新建、改建和扩建的轧机机械设备工程安装验收。主要内容包括：总则，基本规定，设备基础、地脚螺栓和垫板，设备和材料，轧机设备，剪切机，开卷机和卷取机、辊道、冷床、运输设备、移送和翻转设备、矫直机、活套、焊机、加热炉、辅助设备、安全和环保、附录Ａ轧机机械设备工程安装分项工程质量验收记录、附录Ｂ轧机机械设备工程安装分部工程质量验收记录、附录Ｃ轧机机械设备工程安装单位工程质量验收记录、附录Ｄ设备无负荷试运转记录。中华人民共和国住房和城乡建设部公告第1274号住房城乡建设部关于发布国家标准《轧机机械设备工程安装验收规范》的公告现批准《轧机机械设备工程安装验收规范》为国家标准，编号为GB50386-2016，自2017年4月1日起实施。其中，第7.5.1条为强制性条文，必须严格执行。原《轧机机械设备工程安装验收规范》GB50386-2006同时废止。本规范由我部标准定额研究所组织中国计划出版社出版发行。住房城乡建设部2016年8月18日

翻译完成

切换

GB50386-2016轧机机械设备工程安装验收规范（英文版）

中华人民共和国住房和城乡建设部

扉页
版权信息
+书签
Announcement of Housing and Urban-Rural Development of the People s Republic of China
Foreword
1 General Provisions
2 Basic Requirements
3 Equipment Foundation，Anchor Bolt and Packer
3.1 General Requirements
3.2 Equipment Foundation
3.3 Anchor Bolt
3.4 Packer
4 Equipment and Materials
4.1 General Requirements
4.2 Equipment and Materials
5 Rolling Mill
5.1 Base Plate
5.2 Mill Housing
5.3 Mill Roll Adjusting Device
5.4 Main Driving Device
5.5 Roll Changing Device
5.6 Test Run
6 Shears
6.1 General Requirements
6.2 Billet Shears
6.3 Plate Shears
6.4 Strip Shears
6.5 Driving Reducer
6.6 Test Run
7 Uncoiler and Coiler
7.1 Uncoiler
7.2 Coiler
7.3 Hot Coil Box
7.4 Auxiliary Facilities
7.5 Test Run
8 Roller Table
8.1 Centralized Driving Roller Table
8.2 Single Driving Roller Table
8.3 Lifting/Swing/Shifting Roller Table
8.4 Special Roller Table
8.5 Test Run
9 Cooling Bed
9.1 Stepping Racking-type Cooling Bed
9.2 Chain-type and Rope-type Dragging Cooling Bed
9.3 Supporting Trunnion Roller Bevelled Track Walking Beam Cooling Bed
9.4 Rolling Disc Cooling Bed
9.5 Cooling Bench
9.6 Test Run
10 Conveyor
10.1 Walking-beam Conveyor
10.2 Chain Conveyor
10.3 Double Chain-scraper Conveyor
10.4 Screw Conveyor
10.5 Ingot Transfer Car
10.6 Coil Transfer Car
10.7 Test Run
11 Transfer and Tilting Equipment
11.1 Manipulator
11.2 Pusher and Steel Discharger
11.3 Long Product Transverse Pick-up/Delivery Device
11.4 Tilter
11.5 Turning Table
11.6 Sheet Piler
11.7 Test Run
12 Straightener
12.1 Gag Straightener
12.2 Parallel Roll Straightener
12.3 Tension Straightener
12.4 Cross Roll Straightener
12.5 Test Run
13 Loop
13.1 Steel Structure
13.2 Rail
13.3 Swing Door
13.4 Looping Car
13.5 Roller and Roller Car
13.6 Winch
13.7 Test Run
14 Welding Machine
14.1 Flash Welding Machine
14.2 Narrow-lap Welding Machine
14.3 Laser Welding Machine
14.4 Test Run
15 Heating Furnace
15.1 Walking-beam Furnace
15.2 Annular Furnace
15.3 Continuous Annealing Furnace
15.4 Roller-hearth Furnace
15.5 Test Run
16 Auxiliary Facilities
16.1 Sawing Machine
16.2 Shear Gauge
16.3 Printer
16.4 Weighing Machine
16.5 Bundler
16.6 Shot Blaster
16.7 Pickling Equipment
16.8 Slab Sizing Press
16.9 Test Run
17 Safety and Environmental Protection
Appendix A Subentry Engineering Quality Acceptance Records of Rolling Mill Mechanical Equipment Engineering Installation
Appendix B Subsection Engineering Quality Acceptance Records of Rolling Mill Mechanical Equipment Engineering Installation
Appendix C Unit Engineering Quality Acceptance Records of Rolling Mill Mechanical Equipment Engineering Installation
Appendix D Equipment No Load Test Run Records
Explanation of Wording in This Code
List of Quoted Standards

简介

版权

GB50386-2016轧机机械设备工程安装验收规范（英文版）